|
  |
 Dvp720 Experimental Firmware, Merging of DVP720 and Pioneer DV-575 fw |
|
|
|
|
 Oct 25 2005, 20:18
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
QUOTE(jOlDMaN @ Oct 25 2005, 17:26) Hey Mosarella! :)
I know you are doing a great job!
I also know that I might seem redundant.
But...
Is there any chance for txt support in DVP720?
I mean MicroDVD format, so it's the same as sub.
I am not the only one who's got lotsa movies with MicroDVD subtitles.
The only thing is they're not sub but txt.
I'd appreciate letting me know what you think about this problem.
Is it solvable in any way?
[right][snapback]12562[/snapback][/right]
I have been trying to solve this, but not found a solution yet. BR Lee
|
|
|
|
|
|
|
|
Oct 25 2005, 21:48
|
Newbie
Group: Members
Posts: 1
Joined: 30-January 05
Member No.: 24,792
|
QUOTE(sprogo @ Oct 25 2005, 17:32) Hello Moseralla, I am asking too much but I would be appreciated if you answer my questions: I am going to update my 720sa/00 (I think it is 00) with your v2.02. 1)Which one of v2.02 I should use? 2) Where can I get this "dvp720sa_02_fus_eng.bin"? Here another question if my players stroke code is 00, Should I download "dvp720sa_ 00_fus_eng.bin" instead of above one? 3) What do you mean that file never been converted? Is it unconverted in original place ? 4)Can I use the info mentioned below for serial connection and uploading firmware? How to recover a dead player using an serial cableThanks in advance My fw and servo info is as following; MADv33.03 720-00 2 13 servo=03150000 region=0 [right][snapback]12561[/snapback][/right] Dear Lee-Mosarella, thank you for the really great job! Now I try to make my 720th also DVD-audio compatible and I have the same questions and fw/hw/servo like Sprogo. Could you please send me the help-PM too? Thank you in advance! Alexei
This post has been edited by Widder: Oct 25 2005, 23:06
|
|
|
|
|
|
|
|
Oct 26 2005, 20:16
|
Newbie
Group: Members
Posts: 15
Joined: 12-April 05
Member No.: 34,416
|
Hello Mosarella,
I will get my data cable a few days later. It is very difficult to wait that moment. Can I make a full upgrade process for DVD-A with serial cable later on whenever I get the cable.
Pls. advise..
Thanks
ilker
This post has been edited by sprogo: Oct 26 2005, 20:55
|
|
|
|
|
|
|
|
Oct 30 2005, 16:05
|
Newbie
Group: Members
Posts: 15
Joined: 2-May 05
Member No.: 37,184
|
QUOTE(sprogo @ Oct 26 2005, 21:16) Hello Mosarella,
I will get my data cable a few days later. It is very difficult to wait that moment. Can I make a full upgrade process for DVD-A with serial cable later on whenever I get the cable.
Pls. advise..
Thanks
ilker
[right][snapback]12598[/snapback][/right]
Hey Mosarella,Lee and others I had already upgade my Philips 720/SA 02 with the latest firmware from LEE DVP720_V37_LEE_V2.02 But after the upgrade I realised that I can't use different name for subtitles and movie name. Does any body can play srt and avi with different names? I 'm use that pioneer 575 can do this with the latest version of Gufiak. Can we have resume in divx movies? Thanks in advance
|
|
|
|
|
|
|
|
Oct 30 2005, 19:30
|
Newbie
Group: Members
Posts: 9
Joined: 23-August 05
Member No.: 58,480
|
QUOTE(mosarella99 @ Oct 25 2005, 20:18) I have been trying to solve this, but not found a solution yet.
BR
Lee
[right][snapback]12565[/snapback][/right]
I don't know a thing about disassembling this software, but in my opinion- the thing is to change supporting sub into txt. I mean it's the same format. We only need to change this software to read txt instead of sub. Any chances ?
|
|
|
|
|
|
|
|
Oct 30 2005, 23:02
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
QUOTE(zorzeta @ Oct 30 2005, 15:05) Hey Mosarella,Lee and others
I had already upgade my Philips 720/SA 02 with the latest firmware from LEE
DVP720_V37_LEE_V2.02
But after the upgrade I realised that I can't use different name for subtitles and
movie name.
Does any body can play srt and avi with different names?
I 'm use that pioneer 575 can do this with the latest version of Gufiak.
Can we have resume in divx movies?
Thanks in advance
[right][snapback]12740[/snapback][/right]
Hi, I know that MeTePe did a patch earlier to solve this. Maybe he can add it into the v2.02? BR Lee
|
|
|
|
|
|
|
|
Oct 31 2005, 12:43
|
Newbie
Group: Members
Posts: 15
Joined: 2-May 05
Member No.: 37,184
|
QUOTE(mosarella99 @ Oct 31 2005, 00:02) Hi,
I know that MeTePe did a patch earlier to solve this. Maybe he can add it into the v2.02?
BR
Lee
[right][snapback]12758[/snapback][/right]
Where can I find this patch? Is it added in a previous version of firmware Thanks
|
|
|
|
|
|
|
|
Oct 31 2005, 16:16
|
Newbie
Group: Members
Posts: 2
Joined: 24-October 05
Member No.: 79,217
|
QUOTE(zorzeta @ Oct 31 2005, 12:43) Where can I find this patch?
Is it added in a previous version of firmware
Thanks
[right][snapback]12774[/snapback][/right]
This is the website of Metepe http://www.websamba.com/metepe
|
|
|
|
|
|
|
|
Nov 1 2005, 00:05
|
Newbie
Group: Members
Posts: 25
Joined: 7-June 05
Member No.: 41,778
|
QUOTE(mosarella99 @ Oct 30 2005, 23:02) Hi,
I know that MeTePe did a patch earlier to solve this. Maybe he can add it into the v2.02?
BR
Lee
[right][snapback]12758[/snapback][/right]
I already did. Here it is: http://metepe.divxplanet.net/DVP720_V37_LE..._202_MeTePe.zipThere are a few minor changes.. Users must adapt them for their preferences. 1. Divx subtitle Fonts Baltic and Greek are changed for bigger Turkish fonts. 2. Player can play avi with subtitle with different names but file extentions must bu correct i.e. SUB if it is sub, SRT if it is SRT. 3. Max. # of subtitles of a kind (sub, srt, ssa, smi) is limited to 10 (40 in total) in a directory. 4. Subtitles can be selected by pressing subtitle button on RC. They are not shown on the browser. 5. Many movies and subtitles in the root directory causes confusion, so prefer burning movies and their subs in directories. 6. If you are happy with Lee's 2.02, just take ARM 2 block from the above firmware and implant it to the other one by MtkRemaker. I don't know much about Arm programing.. I just followed the lead by Gufiak and Exsport. But it works. Thanx to Lee and all the other people who provide those great firmwares to us by their work. Best Wishes..
|
|
|
|
|
|
|
|
Nov 1 2005, 00:13
|
Newbie
Group: Members
Posts: 25
Joined: 7-June 05
Member No.: 41,778
|
Hi Mosarella99,
I tried to patch volume up and down (0x57 and 0x58) to the RC button tables but it doesn't seem to work. As far as I see, Lx3900 and 720sa have very similar softwares.. Is this function not supported for 720sa or is there a prohibit or something? When I press the volume up key I see hand sign only.
Best wishes..
|
|
|
|
|
|
|
|
 Nov 1 2005, 12:18
|
Newbie
Group: Members
Posts: 5
Joined: 1-November 05
From: Nottingham
Member No.: 82,003
|
@mosarella99: I've now installed your firmware 2.02 on my DVP720SA/00 (old servo) and I just got to say THANK YOU!!! :D This is so great, at last my player remembers I want analogue stereo out, I can easily switch between SACD 5.1/Stereo, I can play the SACD CD layer etc!!!
Now I just have some "minor" wishes... :newblush:
1) Make it remember to play SACD stereo by default (now it remembers the CD or SACD 5.1 layer, so I guess SACD stereo should be possible too?)
2) Make the "disc" text on turn-on shorter, now you have to wait a while before it starts to load (just as always)
3) Make SACD CD text possible
4) Make it possible to view CD Text in the player display anytime during a track by pressing some button. Also, it'd be great if the order of the info was changed to Title / Artist / Album - as it is now you have to view the album and artist on every track before viewing the title even if all tracks are by the same artist/album! (Silly Philips...)
2 small comments:
> Sometimes the player display says "Dolby PL II" when inserting a CD Audio I haven't played before, does that mean the output isn't pure stereo? Next time I put in the same CD it says "stereo".
> When I set the display to 40% it isn't turned off.
Again - MANY THANKS! :coolspeak:
This post has been edited by Mr Love: Nov 1 2005, 16:32
--------------------
Proud owner of a Philips DVP720SA (LEE v2.10!)
|
|
|
|
|
|
|
|
Nov 1 2005, 15:44
|
Newbie
Group: Members
Posts: 2
Joined: 1-November 05
Member No.: 82,075
|
@mosarella99;
Before I start the praise, I just want to tell you all that in my 720SA/02 DVD-Audio works fine after a regular CD-flash, I've never opened up my player.
With that said, let the praise begin: Thank you, thank you, thank you. My DVD-player is full-featured (well.. It lacks ogg and flac support, but hey, it's ok, I have other things for those :) ). *aaaaawesome* work!!
And btw did I say thank you? :)
|
|
|
|
|
|
|
|
 Nov 1 2005, 16:29
|
Newbie
Group: Members
Posts: 5
Joined: 1-November 05
From: Nottingham
Member No.: 82,003
|
@guttergod: Do you mean it plays DVD-Audio with just the firmware update from a CD-R?! I tried that too (with DVD-Audio mode in settings) and it detected there was a DVD-A disc but then nothing happened so I got back to DVD-Video mode.
--------------------
Proud owner of a Philips DVP720SA (LEE v2.10!)
|
|
|
|
|
|
|
|
Nov 1 2005, 20:46
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
Dear all on this forum, Thank you very much for the nice acnowledgements. At the moment I am trying to understand why the audio channel select text is not disapearing for DixX / MPEG4 video when pushing RC <audio>, and it is taking a lot of time. I feel this is a bug that I realy would like to get rid off. Every little patch is extreamly difficult to understand, because there is now real source code. The ideas from all of you are great improvements, but I don't have not enough time to do all this. So, I am sorry to tell that you have to live with the V2.02 for some time. I will still work with improvements, but it will take time. Tanks, Lee
|
|
|
|
|
|
|
|
Nov 1 2005, 22:46
|
Newbie
Group: Members
Posts: 2
Joined: 1-November 05
Member No.: 82,075
|
QUOTE(Mr Love @ Nov 1 2005, 16:29) @guttergod: Do you mean it plays DVD-Audio with just the firmware update from a CD-R?! I tried that too (with DVD-Audio mode in settings) and it detected there was a DVD-A disc but then nothing happened so I got back to DVD-Video mode.
[right][snapback]12835[/snapback][/right]
Yepp, that's what I mean. I don't know if it plays *all* DVD-Audio titles though, it works on my experimental home-brewed ones anyway, and that is exactly what I need. :) These are the infos from my player (for you curious fellas...) SD6.1 V37 720-00 2 SERVO:03150000 REG:0 V2.02 by LEE OpenMtk VERSION 05.00.01.08 SUB-VER 00.00.00.01 8032 05.00.01.08 SERVO 03.15.00.00 RISC 05.00.01.08 DSP 03.09.00.89
|
|
|
|
|
|
|
|
Nov 1 2005, 23:38
|
Newbie
Group: Members
Posts: 8
Joined: 1-November 05
Member No.: 82,246
|
The Packed Bitstream problem was solved in the targa-firmware. Maybe someone could copy that part of code and make it work for the 720sa? http://www.divxtest.com/article.php3?id_article=93
|
|
|
|
|
|
|
|
Nov 7 2005, 00:53
|
Newbie
Group: Members
Posts: 5
Joined: 1-November 05
From: Nottingham
Member No.: 82,003
|
Oh another small wish: When I play an SACD and the disc has come to the end the last track remains selected so if I want to play again from the beginning I just can't press "Play", would be nice if I could (I could before I installed your firmware).
This post has been edited by Mr Love: Nov 7 2005, 10:20
--------------------
Proud owner of a Philips DVP720SA (LEE v2.10!)
|
|
|
|
|
|
|
|
Nov 8 2005, 18:46
|
Newbie
Group: Members
Posts: 3
Joined: 8-November 05
Member No.: 84,688
|
Hi Lee, Thank you for great work! :coolspeak: I'm using DVP720_V37_LEE_V2.02 firmware on my DVP720 and it works very nice. Many thanks for switching off multichannel !!!! (it was really annoying to turn it off every time you put new CD-Audio into the player). I think that I found a small bug in the v.2.02. When you set Stereo mode in <Setup menu><audio setup><analog output> and start playing DVD-VIDEO or DivX, then you cannot change this mode with RC button "Surround". Stereo is the only possible mode to choose. The problem above does not exist wen you set other mode in <Setup menu><audio setup><analog output> ("Virual surround" or "Multichannel"). Then RC button "Surround" works properly and it is possible to switch between all audio modes. Regards. /Rafal (green)
|
|
|
|
|
|
|
|
Nov 8 2005, 22:12
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
QUOTE(green @ Nov 8 2005, 17:46) I think that I found a small bug in the v.2.02. When you set Stereo mode in <Setup menu><audio setup><analog output> and start playing DVD-VIDEO or DivX, then you cannot change this mode with RC button "Surround". Stereo is the only possible mode to choose. The problem above does not exist wen you set other mode in <Setup menu><audio setup><analog output> ("Virual surround" or "Multichannel"). Then RC button "Surround" works properly and it is possible to switch between all audio modes. [right][snapback]13148[/snapback][/right] Hi, This is not a bug. :) When selecting stereo from SETUP menu, the surround button is de-activated to make the player always stay in stereo mode. If you are connecting the player digitaly to a surround system, or you don't have a surround system, this is the best selection. The analog stereo output will then always be in stereo mode on your TV loudspeakers. In this situation you don't need the surround mode, because it is only affecting the analog surround outputs. The Digital output will not be affected If you set multichannel in SETUP menu, the surround button will be enabled again. This is best mode to use if your player is connected with analog connections to analog 5.1 inputs on a surround system. BR Lee
|
|
|
|
|
|
|
|
Nov 8 2005, 22:44
|
Newbie
Group: Members
Posts: 2
Joined: 8-November 05
Member No.: 84,788
|
i will make a First time upgrade for enabling DVD-AUDIO. Where can download the Firmware Yamaha DVD-S657 for serial interface ?
Sorry for my bad english.
Bye Gunnar
|
|
|
|
|
|
|
|
Nov 11 2005, 11:10
|
Newbie
Group: Members
Posts: 6
Joined: 7-July 05
Member No.: 45,290
|
sorry stuid question (maybe)
spin-off means CD update? f.e. for my yammy 657 :confuzzled:
THX :kisstogether:
|
|
|
|
|
|
|
|
Nov 11 2005, 18:47
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
QUOTE(daphy @ Nov 11 2005, 10:10) sorry stuid question (maybe)
spin-off means CD update? f.e. for my yammy 657 :confuzzled:
THX :kisstogether:
[right][snapback]13259[/snapback][/right]
Yes, it means you can upgrade your DVD-S657 and get major improvements. With spin-offs, I just mean that as a result of my work with DVP720, I also made fw for these other players, which is based on same hardware platform. BR Lee
|
|
|
|
|
|
|
|
Nov 12 2005, 13:36
|
Newbie
Group: Members
Posts: 4
Joined: 7-April 05
Member No.: 33,685
|
Just checking in - are there any newer updates for a DVP762/05 (UK and Ireland) model than the excellent DVP762_V36_LEE_V008_52.zip firmware?
|
|
|
|
|
|
|
|
Nov 12 2005, 17:39
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
I have not made any newer versions. Lee QUOTE(firefox @ Nov 12 2005, 12:36) Just checking in - are there any newer updates for a DVP762/05 (UK and Ireland) model than the excellent DVP762_V36_LEE_V008_52.zip firmware?
[right][snapback]13298[/snapback][/right]
|
|
|
|
|
|
|
|
Nov 14 2005, 16:54
|
Newbie
Group: Members
Posts: 1
Joined: 14-November 05
Member No.: 86,909
|
Du u have some bios to DVP762/02 ?? Can u give link ? Witch bios will be the beast for my DVP762/02 ? 50, 52 or 54 ?
This post has been edited by Nastah: Nov 14 2005, 18:45
|
|
|
|
|
|
|
|
Nov 18 2005, 05:36
|
Newbie
Group: Members
Posts: 12
Joined: 23-September 05
Member No.: 68,114
|
QUOTE(hbb @ Nov 1 2005, 23:38) The Packed Bitstream problem was solved in the targa-firmware. Maybe someone could copy that part of code and make it work for the 720sa? http://www.divxtest.com/article.php3?id_article=93[right][snapback]12855[/snapback][/right] It would be more than great if packed bitstream can be fixed! It is really annoying to always have to check xvid avi's for (1) use of b-frames, (2) wether or not packed bitstream is being used and (3) to unpack the bitstream if needed.
|
|
|
|
|
|
|
|
Nov 19 2005, 19:59
|
Newbie
Group: Members
Posts: 15
Joined: 12-April 05
Member No.: 34,416
|
Hello Lee,
I have just finished upgrading process to the latest firmware with a great care of following your instructions step by step. Everything was quite easy and completed without any problem.
1) "dvp720sa_02_fus_eng" (sent by you) has been used for serial updating,
2) "DVP720_V37_LEE_V010_202_MeTePe-1" has been used for cd upgrade for DVD-A and other implementations.
3) Player version matrix has been programmed again with 9-9-9-9-audio-1 key combinations (my player is 720sa-00).
These are my basic testings:
CD audio: good
SACD : good
DVD-video: good
Div-x: good
mp3: good
But for DVD-Audio I am a bit confused; From the setup menu if I choose DVD-Video, I can listen and watch the DVD-Video layer of the DVD-A. IF I choose DVD-Audio from setup menu, when I load a DVD-A, player shows it is a DVD-A in tv screen and DVD in its own LCD screen. It plays nothing but after a while, I noticed that screen track numbers changing by time, but time indicator stays as 000 constantly in its LCD screen although there is no sound and/or video output received.
So, everything works correctly except DVD-A playing. Do you have any idea if I did something wrong? Or any clue to solve this problem?
Regards
ilker
|
|
|
|
|
|
|
|
Nov 19 2005, 22:54
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
Hi, The problem is most likely caused in step 1 or 2 in your upgrade process. In step 1, you must use the original file I sent you (dvp720sa_02_fus_eng.bin), and do a serial upgrade with MtkTool v1.31. Do not convert or save the file I sent to you into CD upgrade format. In step 2, try my V2.03 version in stead. And this must be done with a CD upgrade. If you upgrade your player with serial at this step, you will not get the DVD-AUDIO mode working (like the problem you have) If you ever need a serial update of your player, always use the file I sent you. This file is putting in some information into the FLASH that is needed for DVD-AUDIO. Any serial upgrade with other firmware will erase this information. BR Lee QUOTE(sprogo @ Nov 19 2005, 18:59) Hello Lee,
I have just finished upgrading process to the latest firmware with a great care of following your instructions step by step. Everything was quite easy and completed without any problem.
1) "dvp720sa_02_fus_eng" (sent by you) has been used for serial updating,
2) "DVP720_V37_LEE_V010_202_MeTePe-1" has been used for cd upgrade for DVD-A and other implementations.
3) Player version matrix has been programmed again with 9-9-9-9-audio-1 key combinations (my player is 720sa-00).
These are my basic testings:
CD audio: good
SACD : good
DVD-video: good
Div-x: good
mp3: good
But for DVD-Audio I am a bit confused; From the setup menu if I choose DVD-Video, I can listen and watch the DVD-Video layer of the DVD-A. IF I choose DVD-Audio from setup menu, when I load a DVD-A, player shows it is a DVD-A in tv screen and DVD in its own LCD screen. It plays nothing but after a while, I noticed that screen track numbers changing by time, but time indicator stays as 000 constantly in its LCD screen although there is no sound and/or video output received.
So, everything works correctly except DVD-A playing. Do you have any idea if I did something wrong? Or any clue to solve this problem?
Regards
ilker
[right][snapback]13527[/snapback][/right]
This post has been edited by mosarella99: Nov 19 2005, 22:55
|
|
|
|
|
|
|
|
Nov 20 2005, 01:00
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
Well, he does not tell how he did it. Maybe someone can report how he enabled PB. BR Lee QUOTE(hbb @ Nov 19 2005, 22:21) Umbanda made a firmware for the 5100 which works with packed bitstream. Could you do the same for the 720sa LEE? :) http://board.softpedia.com/index.php?showt...1149&st=160#169[right][snapback]13535[/snapback][/right] |
|
|
|
|
|
|
|
Nov 20 2005, 01:35
|
Newbie
Group: Members
Posts: 1
Joined: 20-November 05
Member No.: 88,839
|
I've tried everything to upgrade my Yamaha S550 to the 657 firmware via CD. Every time I get Unreadable CD. Does anyone have directions they have used that DO work?
|
|
|
|
|
|
|
|
Nov 20 2005, 04:36
|
Newbie
Group: Members
Posts: 15
Joined: 12-April 05
Member No.: 34,416
|
Hi Lee, I used the original file which was sent by you for serial update with Mtktoll v1.29 ( as v1.31 has some problems - look: http://hb.septem.cz/Doc/Mediatek/mediatek/ ) for step-1. After serial update I checked the setup menu of player but there is not any indication for DVD-A in any place. I did second step of update process with a cd with your V2.02 f/w modified by MeTePe. I am going to do it again with your v2.03. I hope only second step will be enough to fix the problem. B.regards ilker QUOTE(mosarella99 @ Nov 19 2005, 22:54) Hi,
The problem is most likely caused in step 1 or 2 in your upgrade process.
In step 1, you must use the original file I sent you (dvp720sa_02_fus_eng.bin), and do a serial upgrade with MtkTool v1.31. Do not convert or save the file I sent to you into CD upgrade format.
In step 2, try my V2.03 version in stead. And this must be done with a CD upgrade. If you upgrade your player with serial at this step, you will not get the DVD-AUDIO mode working (like the problem you have)
If you ever need a serial update of your player, always use the file I sent you. This file is putting in some information into the FLASH that is needed for DVD-AUDIO. Any serial upgrade with other firmware will erase this information.
BR
Lee
[right][snapback]13534[/snapback][/right]
|
|
|
|
|
|
|
|
Nov 20 2005, 13:38
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
QUOTE(dvdwannabe @ Nov 20 2005, 00:35) I've tried everything to upgrade my Yamaha S550 to the 657 firmware via CD. Every time I get Unreadable CD. Does anyone have directions they have used that DO work?
[right][snapback]13541[/snapback][/right]
If you use this firmware, you will get the same result. This fw is based on the DVD-S657. http://board.softpedia.com/index.php?act=A...ype=post&id=412BR Lee
This post has been edited by mosarella99: Nov 20 2005, 13:39
|
|
|
|
|
|
|
|
Nov 20 2005, 13:45
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
QUOTE(sprogo @ Nov 20 2005, 03:36) After serial update I checked the setup menu of player but there is not any indication for DVD-A in any place.
This is correct. There should be no visible change to the original Philips V37, but there is now information in the flash that will be used by LEE V2.03 fw (after CD upgrade) to enable DVD-AUDIO. If you like to check that step 1 is OK, you can do a backup of the player with MtkTool after you have programmed with the file I sent you. Save the backup as a new serial file, and view it in a HEX editor. At address 0xFFF00, there should be hex values different from FF (256 bytes in total). The values will start with 76 33 ... and end with D1 74 (at address 0xFFFFE .. 0xFFFFF). If this is correct, you have success with step 1. BR Lee
This post has been edited by mosarella99: Nov 20 2005, 15:17
|
|
|
|
|
|
|
|
Nov 20 2005, 21:28
|
Newbie
Group: Members
Posts: 24
Joined: 9-October 05
Member No.: 73,917
|
i do not come often here but i see a nice upgrade for my yamaha s550 player but was wondering if must upgrade it with serial cable?
is there no other way to do it?
|
|
|
|
|
|
|
|
Nov 21 2005, 00:40
|
Member
Group: Members
Posts: 178
Joined: 19-December 04
Member No.: 18,427
|
QUOTE(whocarez @ Nov 20 2005, 20:28) i do not come often here but i see a nice upgrade for my yamaha s550 player but was wondering if must upgrade it with serial cable?
is there no other way to do it?
[right][snapback]13560[/snapback][/right]
If you don't need DVD-AUDIO, you can upgrade with CD-upgrade. Use V2.03 BR Lee
|
|
|
|
|
|
|
|
Nov 21 2005, 00:53
|
Newbie
Group: Members
Posts: 24
Joined: 9-October 05
Member No.: 73,917
|
QUOTE(mosarella99 @ Nov 21 2005, 00:40) If you don't need DVD-AUDIO, you can upgrade with CD-upgrade. Use V2.03
BR
Lee
[right][snapback]13565[/snapback][/right]
Ok thx for that but what do you mean with dvd-audio also super audio cd's? Sry for stupid question but i can't see the purpose of audio-dvd's?
|
|
|
|
|
|
|
|
|
