Klik for download
Now I am waiting for MTZ to make it better (fonts, background)...
Thank you
Full Version: Yamada 6700 New Firmware V3
You can download it here:
Klik for download
Now I am waiting for MTZ to make it better (fonts, background)...
Thank you
Klik for download
Now I am waiting for MTZ to make it better (fonts, background)...
Thank you
Thanks, when the should i burn the dummy file with the MTK file?
Thanks ! I wait for MTZ too 
Burn also the Dummy file to be sure.
Please test the Yamada v3 and tell me the diferences between v1 or v2.
I know that V3 has NO Packed Bistream Support.
In V3 is posible to have more than 60 characters/subtitle? This is the part which interests me.
enjoy,
Mtz
Please test the Yamada v3 and tell me the diferences between v1 or v2.
I know that V3 has NO Packed Bistream Support.
In V3 is posible to have more than 60 characters/subtitle? This is the part which interests me.
enjoy,
Mtz
Yes the V3 has NO Packed Bistream Support.
And again YES in V3 is posible to have more than 60 (min 72)characters/subtitle.
enjoy
neneanaie
And again YES in V3 is posible to have more than 60 (min 72)characters/subtitle.
enjoy
neneanaie
QUOTE(Mtz @ Jan 28 2005, 20:03)
Burn also the Dummy file to be sure.
Please test the Yamada v3 and tell me the diferences between v1 or v2.
I know that V3 has NO Packed Bistream Support.
In V3 is posible to have more than 60 characters/subtitle? This is the part which interests me.
enjoy,
Mtz
[right][snapback]2327[/snapback][/right]
Please test the Yamada v3 and tell me the diferences between v1 or v2.
I know that V3 has NO Packed Bistream Support.
In V3 is posible to have more than 60 characters/subtitle? This is the part which interests me.
enjoy,
Mtz
[right][snapback]2327[/snapback][/right]
Please tell me if i can update 6700 with v3 firmware but with greek support language. If yes please tell me the way cause i am newbie here and i dont know many things. (I have already update my 6700 with your firmware but i have problem with this 60 letters limitation)
Thank you in advance.
Tasos
Really what is packet support?
I took the MTKReMaker.exe from MKT and i steal the MTK (Font 5-6).mtf from his Yamada6700_V1_Mtz.zip firmware. After i open the official V3 firmware an i replace the mtk(font5-6) and finnaly i save the new MTK.bin file. I think that the next step is to make the upgrade with this new bin file (including the official dump file). Please anyone tell my if this is the correct way to have greek language support to my 6700 with new V3 firmware (I dont want to kill my dvd player).
Thanks a lot
Tasos.
Thanks a lot
Tasos.
MTZ can you help me please I want to know how to pic an yamada Fw and put more fonts like you do. And to know to how put the codes so the subtitles works.
I just know how to change the OSD, fonts and Mpeg files, but if the original Fw just have let say 4 fonts how can you put 5 fonts if you need? And how it works the codes for big, mid, and sml fonts?
Can you help me on this please.
thanks
redcat
I just know how to change the OSD, fonts and Mpeg files, but if the original Fw just have let say 4 fonts how can you put 5 fonts if you need? And how it works the codes for big, mid, and sml fonts?
Can you help me on this please.
thanks
redcat
I'm not adding more fonts than original firmware has. I don't have time for it or 99 colors for subtitles.
My point is at least one good subtitle for everybody.
enjoy,
Mtz
My point is at least one good subtitle for everybody.
enjoy,
Mtz
Does V3 Firmware solve the problem of 14 characters only in the file browser?????
This is extremly important for playing mp3 music.
This is extremly important for playing mp3 music.
No official firmware will support more than 14 characters for file browser. That is because of the picture preview.
enjoy,
Mtz
enjoy,
Mtz
QUOTE(Mtz @ Feb 1 2005, 20:35)
No official firmware will support more than 14 characters for file browser. That is because of the picture preview.
enjoy,
Mtz
[right][snapback]2490[/snapback][/right]
enjoy,
Mtz
[right][snapback]2490[/snapback][/right]
Yeah, but your fw is not official
In fw for Yamada 6600 it was solved wasn't it? You write: full browser width, you can see extension of file. Could this be solved next time in fw for Yamada 6700? And second question - is somebody working on czech translation of OSD? If nobody is, i could. I my opinion - can i translate to czech some unused language part in fw? For example from French make Czech?P.S. Mtz, your last fw for Yamada 6700 is absolutely great, thank you very much ...
lakyljuk
That description is for 6600.
Yes, you can translate. You can use MTK LangCreator.
Open the languages files from attachment and save them as .mlc. Open that .mlc files in wordpad and use the Language 2 for translation. You can use copy-paste from the already translated czech language instead of french at the good position. You need to verify with the english language file for the correct position and items because the czech language from Yamada 6600 hasn't the same positions like 6700.
After finishing you can upload them here to make the modifications also for english and put in the firmware.
Who want to translate some 1250 codepage for their language, announce here. More max. 2 languages more for translations.
The parts where French is not translated, don't translate. Let the rows empty.
enjoy,
Mtz
Yes, you can translate. You can use MTK LangCreator.
Open the languages files from attachment and save them as .mlc. Open that .mlc files in wordpad and use the Language 2 for translation. You can use copy-paste from the already translated czech language instead of french at the good position. You need to verify with the english language file for the correct position and items because the czech language from Yamada 6600 hasn't the same positions like 6700.
After finishing you can upload them here to make the modifications also for english and put in the firmware.
Who want to translate some 1250 codepage for their language, announce here. More max. 2 languages more for translations.
The parts where French is not translated, don't translate. Let the rows empty.
enjoy,
Mtz
QUOTE(Mtz @ Feb 2 2005, 01:15)
That description is for 6600.
Yes, you can translate. You can use MTK LangCreator.
Open the languages files from attachment and save them as .mlc. Open that .mlc files in wordpad and use the Language 2 for translation. You can use copy-paste from the already translated czech language instead of french at the good position. You need to verify with the english language file for the correct position and items because the czech language from Yamada 6600 hasn't the same positions like 6700.
After finishing you can upload them here to make the modifications also for english and put in the firmware.
Who want to translate some 1250 codepage for their language, announce here. More max. 2 languages more for translations.
The parts where French is not translated, don't translate. Let the rows empty.
enjoy,
Mtz
[right][snapback]2498[/snapback][/right]
Yes, you can translate. You can use MTK LangCreator.
Open the languages files from attachment and save them as .mlc. Open that .mlc files in wordpad and use the Language 2 for translation. You can use copy-paste from the already translated czech language instead of french at the good position. You need to verify with the english language file for the correct position and items because the czech language from Yamada 6600 hasn't the same positions like 6700.
After finishing you can upload them here to make the modifications also for english and put in the firmware.
Who want to translate some 1250 codepage for their language, announce here. More max. 2 languages more for translations.
The parts where French is not translated, don't translate. Let the rows empty.
enjoy,
Mtz
[right][snapback]2498[/snapback][/right]
Hi, I'm currently translating language file from French to Czech - from this ZIP file. But I have question Mtz - In czech translation file for Yamada 6600 there is somewhere used some code inside words:
original czech word "výstup" is written "v\[0xFD]stup". Is it neccesary to write it this way? I don't know which letters should be replaced with such a code. Currently i am translating words without these codes. And what about empty spaces in French translation? You said must let them empty. What will display in these places?
Thanks for help
lakyljuk
MTZ:
I found a problem in a new firmware for yamada 6700. When the movie is playing and I pres the key volume + or -, it's not displyed on the screen. In the first firmware was working fine. Now OSD is not working. I use 1250 version of firmware english OSD language.
Where is the problem?
I found a problem in a new firmware for yamada 6700. When the movie is playing and I pres the key volume + or -, it's not displyed on the screen. In the first firmware was working fine. Now OSD is not working. I use 1250 version of firmware english OSD language.
Where is the problem?
@lakyljuk if you see "v\[0xFD]stup", use it, not "výstup". That because the player will read \[0xFD] as ý. If you put ý is possible that in you menu to see _space_ instead of ý.
If any language has untranslated lines, that lines will be_always_showed in english. Not all lines from language files are used in menu. This is the reason why in another languages than Language 1 appear empty lines.
@majstor, because the subtitle is in lowered position you can't see Mute, Mute Off, Vol. Do you really use them from the dvd player remote? I_only_use the TV remote.
enjoy,
Mtz
If any language has untranslated lines, that lines will be_always_showed in english. Not all lines from language files are used in menu. This is the reason why in another languages than Language 1 appear empty lines.
@majstor, because the subtitle is in lowered position you can't see Mute, Mute Off, Vol. Do you really use them from the dvd player remote? I_only_use the TV remote.
enjoy,
Mtz
QUOTE(Mtz @ Feb 2 2005, 19:15)
@lakyljuk if you see "v\[0xFD]stup", use it, not "výstup". That because the player will read \[0xFD] as ý. If you put ý is possible that in you menu to see _space_ instead of ý.
If any language has untranslated lines, that lines will be_always_showed in english. Not all lines from language files are used in menu. This is the reason why in another languages than Language 1 appear empty lines.
@majstor, because the subtitle is in lowered position you can't see Mute, Mute Off, Vol. Do you really use them from the dvd player remote? I_only_use the TV remote.
enjoy,
Mtz
[right][snapback]2519[/snapback][/right]
If any language has untranslated lines, that lines will be_always_showed in english. Not all lines from language files are used in menu. This is the reason why in another languages than Language 1 appear empty lines.
@majstor, because the subtitle is in lowered position you can't see Mute, Mute Off, Vol. Do you really use them from the dvd player remote? I_only_use the TV remote.
enjoy,
Mtz
[right][snapback]2519[/snapback][/right]
Thanks for reply. I will correct it. And what about length of row? If I am translating from English to Czech, some words are longer. Could this lead to some problems? For example cutting to some maximum length or similar problems? Thanks.
lakyljuk
Try to use the same lenght like in 6600 czech language. The only problem if you use longer lines can be in some OSD menus to not displaying all line wroted by you.
enjoy,
Mtz
enjoy,
Mtz
QUOTE(Mtz @ Feb 2 2005, 21:15)
Try to use the same lenght like in 6600 czech language. The only problem if you use longer lines can be in some OSD menus to not displaying all line wroted by you.
enjoy,
Mtz
[right][snapback]2530[/snapback][/right]
enjoy,
Mtz
[right][snapback]2530[/snapback][/right]
Thanks for reply. I will try to shorten the rows as many as possible. Translation is almost done. And what about zoom icon displaying during DVD playback in zoom mode? During DivX playback the icon is not here when playing in zoom mode. Could this be fixed? Thanks.
lakyljuk
I posted here language file with Czech OSD, but when I put it in Mtz firmware, I found several mistakes after viewing it on screen 
I will make better soon.
lakyljuk
I will make better soon.lakyljuk
I want to traslate the OSD menu in my language, where can I find an englih menu
(english Language.mlc) ?
If anybody can put it here...then I can traslate it.
QUOTE(majstor @ Feb 3 2005, 12:03)
I want to traslate the OSD menu in my language, where can I find an englih menu
(english Language.mlc) ?
If anybody can put it here...then I can traslate it.
[right][snapback]2540[/snapback][/right]
(english Language.mlc) ?
If anybody can put it here...then I can traslate it.
[right][snapback]2540[/snapback][/right]
You can find it in this thread, Mtz posted here file Language.zip, which contains English language file.
lakyljuk
Is there firmware for yamada 6700 with packed bitstream support, bigger fonts and 1250 codepage(croatian)?
Hello everybody.This is my first post, and i'm sorry if i'm posting some question previously answered...
Kudos to Mtz for his work supporting divx players.
Today i received my Yamada 6700. (actually, it's not mine... i'm gonna give it to my girlfriend as a birthday/valentine's day present. Don't worry about me, i watch my divx movies through my tv-out or Xbox. Even so, i'd like to offer her the coolest player possible.)
I upgraded it with the latest Mtz firmware Yamada6700_V1_Mtz.
I think it solved the fast forwarding bug, at least it works!
But the background hasn't changed... I still see the standard Yamada background each time i turn on the player...
Needless to say, i want the cool flower background!
Is it possible the upgrade didn't go as planned?
And if so, shouldn't the player be dead? (It isn't, i checked )
Should i re-run the upgrade cd?
Thanks in advance for your replies.
Regards.
Kudos to Mtz for his work supporting divx players.
Today i received my Yamada 6700. (actually, it's not mine... i'm gonna give it to my girlfriend as a birthday/valentine's day present. Don't worry about me, i watch my divx movies through my tv-out or Xbox. Even so, i'd like to offer her the coolest player possible.)
I upgraded it with the latest Mtz firmware Yamada6700_V1_Mtz.
I think it solved the fast forwarding bug, at least it works!
But the background hasn't changed... I still see the standard Yamada background each time i turn on the player...
Needless to say, i want the cool flower background!
Is it possible the upgrade didn't go as planned?
And if so, shouldn't the player be dead? (It isn't, i checked
)Should i re-run the upgrade cd?
Thanks in advance for your replies.
Regards.
QUOTE(DarkAngelX @ Feb 3 2005, 19:57)
Hello everybody.This is my first post, and i'm sorry if i'm posting some question previously answered...
Kudos to Mtz for his work supporting divx players.
Today i received my Yamada 6700. (actually, it's not mine... i'm gonna give it to my girlfriend as a birthday/valentine's day present. Don't worry about me, i watch my divx movies through my tv-out or Xbox. Even so, i'd like to offer her the coolest player possible.)
I upgraded it with the latest Mtz firmware Yamada6700_V1_Mtz.
I think it solved the fast forwarding bug, at least it works!
But the background hasn't changed... I still see the standard Yamada background each time i turn on the player...
Needless to say, i want the cool flower background!
Is it possible the upgrade didn't go as planned?
And if so, shouldn't the player be dead? (It isn't, i checked )
Should i re-run the upgrade cd?
Thanks in advance for your replies.
Regards.
[right][snapback]2555[/snapback][/right]
Kudos to Mtz for his work supporting divx players.
Today i received my Yamada 6700. (actually, it's not mine... i'm gonna give it to my girlfriend as a birthday/valentine's day present. Don't worry about me, i watch my divx movies through my tv-out or Xbox. Even so, i'd like to offer her the coolest player possible.)
I upgraded it with the latest Mtz firmware Yamada6700_V1_Mtz.
I think it solved the fast forwarding bug, at least it works!
But the background hasn't changed... I still see the standard Yamada background each time i turn on the player...
Needless to say, i want the cool flower background!
Is it possible the upgrade didn't go as planned?
And if so, shouldn't the player be dead? (It isn't, i checked
)Should i re-run the upgrade cd?
Thanks in advance for your replies.
Regards.
[right][snapback]2555[/snapback][/right]
V1 is not latest ...
Try upgrade with V3RC1 or RC2 (depending on country you are from). I upgraded with it few days ago and I have cool Mtz background
Oops, my bad...
I decided to run the firmware cd again and this time i see the plant background.
I don't know what happened the first time... (i went to bathroom and lost track of the process)
Anyway, it looks ok now, just need to reset to factory defaults.
Mtz, thanks again for your work.
I'm looking forward to your next release.
Regards
I decided to run the firmware cd again and this time i see the plant background.
I don't know what happened the first time... (i went to bathroom and lost track of the process)
Anyway, it looks ok now, just need to reset to factory defaults.
Mtz, thanks again for your work.
I'm looking forward to your next release.
Regards
QUOTE(lakyljuk @ Feb 3 2005, 18:34)
V1 is not latest ... Try upgrade with V3RC1 or RC2 (depending on country you are from). I upgraded with it few days ago and I have cool Mtz background
[right][snapback]2556[/snapback][/right]
Try upgrade with V3RC1 or RC2 (depending on country you are from). I upgraded with it few days ago and I have cool Mtz background [right][snapback]2556[/snapback][/right]
Lakyljuk
I'm sorry, i didn't see your post before.
V3RC1 or RC2?
I don't know those FW.
And i can't find them on Mtz's site either...
Where can i find them?
Thanks.
Ok, i've found it. I'm sorry, i've been sick with the flu for a couple of days now, so i'm a little messed up.
I'll try not to be so impulsive from now on.
Thanks
I'll try not to be so impulsive from now on.
Thanks
I don't find an english language file, I need it for translation. (yamada 6700) can anybody paste it here?
QUOTE(majstor @ Feb 4 2005, 09:09)
I don't find an english language file, I need it for translation. (yamada 6700) can anybody paste it here?
[right][snapback]2572[/snapback][/right]
[right][snapback]2572[/snapback][/right]
Hi,
it is on this page
) http://board.softpedia.com/index.php?act=A...ype=post&id=627
lakyljuk
Here is a new Slovenian language (from PYPS makers).
You can include this lang. in your next MTZ firmware.
You can include this lang. in your next MTZ firmware.
Hello Mtz (or anyone who knows it )
I was translating OSD for this firmware to czech language. Everywhere, where was "ý" sign, i put a code \[0xFD]. This could be represented by player as "ý". BUT, when I put whole language file into Mtz fw and flashed it to player, in place, here "ý" should be show, there is nothing. Nor empty space, neither other character, just nothing. So word "levý" which means left, is displayed like "lev". Does anyone know correct code for these kind of characters?
Thanks in advance
lakyljuk
)I was translating OSD for this firmware to czech language. Everywhere, where was "ý" sign, i put a code \[0xFD]. This could be represented by player as "ý". BUT, when I put whole language file into Mtz fw and flashed it to player, in place, here "ý" should be show, there is nothing. Nor empty space, neither other character, just nothing. So word "levý" which means left, is displayed like "lev". Does anyone know correct code for these kind of characters?
Thanks in advance
lakyljuk
hello!!
i have tried the Yamada6700_1253_V3RC1_Mtz and i had no problem when i update the firmware in my player... then i tried to put the new firmware Yamada6700_1252_V3RC2_Mtz because it support my natural language (portuguese)..
and while i was updating my player he just stop.... he open the cd door and have not restart it by itself as usual....
now he just has the power ligth on and say hello on the display...
what can i do to recuver it.....
and what i did wrong?
isn't Yamada6700_1252_V3RC2_Mtz a firmware or is just a aditional file??
Mtz can you help me??? or anyone??
i apreciate an answer.... i'm new with divx players
thanks!!!
Angela
i have tried the Yamada6700_1253_V3RC1_Mtz and i had no problem when i update the firmware in my player... then i tried to put the new firmware Yamada6700_1252_V3RC2_Mtz because it support my natural language (portuguese)..
and while i was updating my player he just stop.... he open the cd door and have not restart it by itself as usual....
now he just has the power ligth on and say hello on the display...
what can i do to recuver it.....
and what i did wrong?
isn't Yamada6700_1252_V3RC2_Mtz a firmware or is just a aditional file??
Mtz can you help me??? or anyone??
i apreciate an answer.... i'm new with divx players
thanks!!!
Angela
lakyljuk, I don't have the player so giving an answer is hard. Try to use "y" instead of that code.
angielaz, sorry but for some reason your player is dead. Is not firmware fault. You need to recover it using a serial cable. How to is here. Follow also the link from the bottom of the guide to the forum discussion regarding this.
Good Luck!
angielaz, sorry but for some reason your player is dead. Is not firmware fault. You need to recover it using a serial cable. How to is here. Follow also the link from the bottom of the guide to the forum discussion regarding this.
Good Luck!
QUOTE(angielaz @ Feb 4 2005, 23:18)
hello!!
i have tried the Yamada6700_1253_V3RC1_Mtz and i had no problem when i update the firmware in my player... then i tried to put the new firmware Yamada6700_1252_V3RC2_Mtz because it support my natural language (portuguese)..
and while i was updating my player he just stop.... he open the cd door and have not restart it by itself as usual....
now he just has the power ligth on and say hello on the display...
what can i do to recuver it.....
and what i did wrong?
isn't Yamada6700_1252_V3RC2_Mtz a firmware or is just a aditional file??
Mtz can you help me??? or anyone??
i apreciate an answer.... i'm new with divx players
thanks!!!
Angela
[right][snapback]2602[/snapback][/right]
i have tried the Yamada6700_1253_V3RC1_Mtz and i had no problem when i update the firmware in my player... then i tried to put the new firmware Yamada6700_1252_V3RC2_Mtz because it support my natural language (portuguese)..
and while i was updating my player he just stop.... he open the cd door and have not restart it by itself as usual....
now he just has the power ligth on and say hello on the display...
what can i do to recuver it.....
and what i did wrong?
isn't Yamada6700_1252_V3RC2_Mtz a firmware or is just a aditional file??
Mtz can you help me??? or anyone??
i apreciate an answer.... i'm new with divx players
thanks!!!
Angela[right][snapback]2602[/snapback][/right]
Angela, talvez tenhas "morto" o teu leitor...
Também fiz o update c o Yamada6700_1252_V3RC2_Mtz e n tive probs.(apesar d fazer figas no momento da alteração!)
Mas n desesperes. Podes ressuscitar o teu leitor (a garantia cobre este tipo d situações).Vai ao site do Mtz e encontras solução.
Fica bem.
Please stay in english.
You can use your mother language in Private Messages.
What do you think if I'll start writing here in romanian?
I can read in many languages, but think about the other users.
enjoy,
Mtz
You can use your mother language in Private Messages.
What do you think if I'll start writing here in romanian?
I can read in many languages, but think about the other users.
enjoy,
Mtz
Hi, Mtz
I finally traslated Yamada 6700 OSD to czech. I put it in your last fw V3RC2 and flashed my player and everything looks perfect. So if you would like to put it in your next fw, here it is.
lakyljuk
I finally traslated Yamada 6700 OSD to czech. I put it in your last fw V3RC2 and flashed my player and everything looks perfect. So if you would like to put it in your next fw, here it is.
lakyljuk
Hi all,
This is my first post here but I had to have a say,, I bought a 6700 and I wasn't very happy with it out of the box,, the thing was when you FF or RW a avi file it crashed.
Didn't anybody TEST these when they released it???
I put the update on " mtk6700v2 " and yes it cured the ff/rw bug but then I started to get dark patches across the picture when watching any film.
So thinking it was a connection problem tried a different scart lead,, no help.
Then I tried my friends 6700 which he hadn't updated and the picture was perfect, must be somthing wrong with update "mtk6700v2"
I've just flashed with mtk6700v3 and it's cured my dark patches but whats with getting rid of Packed Bitstream support???
Perhaps the new model 6800 is due out..
I'll be testing the firmware over the next few days if I find any probs I'll report back.
Thanks for reading
Gaz
This is my first post here but I had to have a say,, I bought a 6700 and I wasn't very happy with it out of the box,, the thing was when you FF or RW a avi file it crashed.
Didn't anybody TEST these when they released it???
I put the update on " mtk6700v2 " and yes it cured the ff/rw bug but then I started to get dark patches across the picture when watching any film.
So thinking it was a connection problem tried a different scart lead,, no help.
Then I tried my friends 6700 which he hadn't updated and the picture was perfect, must be somthing wrong with update "mtk6700v2"
I've just flashed with mtk6700v3 and it's cured my dark patches but whats with getting rid of Packed Bitstream support???
Perhaps the new model 6800 is due out..
I'll be testing the firmware over the next few days if I find any probs I'll report back.
Thanks for reading
Gaz
QUOTE(Gaz @ Feb 5 2005, 15:33)
Hi all,
This is my first post here but I had to have a say,, I bought a 6700 and I wasn't very happy with it out of the box,, the thing was when you FF or RW a avi file it crashed.
Didn't anybody TEST these when they released it???
I put the update on " mtk6700v2 " and yes it cured the ff/rw bug but then I started to get dark patches across the picture when watching any film.
So thinking it was a connection problem tried a different scart lead,, no help.
Then I tried my friends 6700 which he hadn't updated and the picture was perfect, must be somthing wrong with update "mtk6700v2"
I've just flashed with mtk6700v3 and it's cured my dark patches but whats with getting rid of Packed Bitstream support???
Perhaps the new model 6800 is due out..
I'll be testing the firmware over the next few days if I find any probs I'll report back.
Thanks for reading
Gaz
[right][snapback]2635[/snapback][/right]
This is my first post here but I had to have a say,, I bought a 6700 and I wasn't very happy with it out of the box,, the thing was when you FF or RW a avi file it crashed.
Didn't anybody TEST these when they released it???
I put the update on " mtk6700v2 " and yes it cured the ff/rw bug but then I started to get dark patches across the picture when watching any film.
So thinking it was a connection problem tried a different scart lead,, no help.
Then I tried my friends 6700 which he hadn't updated and the picture was perfect, must be somthing wrong with update "mtk6700v2"
I've just flashed with mtk6700v3 and it's cured my dark patches but whats with getting rid of Packed Bitstream support???
Perhaps the new model 6800 is due out..
I'll be testing the firmware over the next few days if I find any probs I'll report back.
Thanks for reading
Gaz
[right][snapback]2635[/snapback][/right]
lo, Well I tested my 6700 with a couple of AVI's movies last night and both of them started fine,, but soon lost Audio sync,, the sound seem to get more out of sync the longer I left it.
If I ff it quickly it corrects itself for a bit,,but soon drifts out again.
I did test both movies on my 6600 and didn't have a problem.
Question, can I now flash it back to Yamada6700_V1_Mtz from mtk6700v3.zip?
Because the only problem I had noticed with the original drivers was the FF/RW bug.
Any help much appreciated
Gaz
You can flash back anytime and many times you want. Just use the correct firmware for 6700.
enjoy,
Mtz
enjoy,
Mtz
QUOTE(Mtz @ Feb 5 2005, 05:09)
Please stay in english.
You can use your mother language in Private Messages.
What do you think if I'll start writing here in romanian?
I can read in many languages, but think about the other users.
enjoy,
Mtz
[right][snapback]2614[/snapback][/right]
You can use your mother language in Private Messages.
What do you think if I'll start writing here in romanian?
I can read in many languages, but think about the other users.
enjoy,
Mtz
[right][snapback]2614[/snapback][/right]
Sorry, won't happen again.
Some divx movies have an audio/sync problem. On PC I can watch them perfectly, but with this player, when I do fast forward the audio doesnt' remain synchronized and sometimes its not even necessary to do this, just let the movie run normally and the audo doesn't get synchronized. Does this new firmware solves this problem?
Did you upgraded with the latest firmware from my site?
It cost you 5 minutes. Faster than waiting here for a reply from some 6700 user (I don't have this player).
enjoy,
Mtz
It cost you 5 minutes. Faster than waiting here for a reply from some 6700 user (I don't have this player).
enjoy,
Mtz
Hello,
I just tried to flash my new Yamada 6700 and unfortunatelly there was an electrical stop during the upgrading.
Now i try to open it, it gets electricity, but no response from the remote or any button
Can anyone help me please? or can you tell me how to reset to default (if possible)?
Thanks in advance
I just tried to flash my new Yamada 6700 and unfortunatelly there was an electrical stop during the upgrading.
Now i try to open it, it gets electricity, but no response from the remote or any button
Can anyone help me please? or can you tell me how to reset to default (if possible)?
Thanks in advance
QUOTE(Gtb @ Feb 14 2005, 17:17)
Hello,
I just tried to flash my new Yamada 6700 and unfortunatelly there was an electrical stop during the upgrading.
Now i try to open it, it gets electricity, but no response from the remote or any button
Can anyone help me please? or can you tell me how to reset to default (if possible)?
Thanks in advance
[right][snapback]2944[/snapback][/right]
I just tried to flash my new Yamada 6700 and unfortunatelly there was an electrical stop during the upgrading.
Now i try to open it, it gets electricity, but no response from the remote or any button
Can anyone help me please? or can you tell me how to reset to default (if possible)?
Thanks in advance
[right][snapback]2944[/snapback][/right]
http://board.softpedia.com/index.php?showtopic=301
think read that and also
http://mtz.softpedia.com/index.php?option=...&id=20&Itemid=2
good luck
MTZ:
Can you put an option that I can, save subtitle font (biger) (code 8279), because I have to type always that code when I put ON my player?
TNX!
Can you put an option that I can, save subtitle font (biger) (code 8279), because I have to type always that code when I put ON my player?
TNX!
QUOTE(toni castor @ Feb 12 2005, 19:28)
Some divx movies have an audio/sync problem. On PC I can watch them perfectly, but with this player, when I do fast forward the audio doesnt' remain synchronized and sometimes its not even necessary to do this, just let the movie run normally and the audo doesn't get synchronized. Does this new firmware solves this problem?
[right][snapback]2896[/snapback][/right]
[right][snapback]2896[/snapback][/right]
QUOTE(Mtz @ Feb 12 2005, 22:42)
Did you upgraded with the latest firmware from my site?
It cost you 5 minutes. Faster than waiting here for a reply from some 6700 user (I don't have this player).
enjoy,
Mtz
[right][snapback]2906[/snapback][/right]
It cost you 5 minutes. Faster than waiting here for a reply from some 6700 user (I don't have this player).
enjoy,
Mtz
[right][snapback]2906[/snapback][/right]
Hi,
I have the same problem as toni castor. I upgraded my 6700 with your latest version but the problem is still there. I usually go back to a previous version V2 and then re-apply the newest V3. The sound is correctly repaired and syncronysed. The problem re-appear some time after (usually when I try to see a movie in the next day).
Mtz, Can You Help Us?
Tanx
@majstor, I can't yet.
@loceharan, I don't know why is that bug. I don't have the player to test it.
enjoy,
Mtz
@loceharan, I don't know why is that bug. I don't have the player to test it.
enjoy,
Mtz
Hi Mtz,
Could it be possible to add support for long filenames in filebrowser? In Yamada 6600 firmware it's solved.
lakyljuk
Could it be possible to add support for long filenames in filebrowser? In Yamada 6600 firmware it's solved.
lakyljuk
This is a "lo-fi" version of our main content. To view the full version with more information, formatting and images, please click here.